top of page
Numesh_Logo_July2018_Logo+Nominal Blanc.

WIRE 

ENGINEERED WELDED WIRE REINFORCEMENT

The Engineered Welded Wire Reinforcement is a custom made product as per the project requirement with variable dimensions and is used for structural concrete applications, replacing traditional steel rebar reinforcement. The main features of the engineered welded wire reinforcement are: less steel area for the same resistance, 3 to 4 times faster installation and ensures full compliance with the design during installation.

Technical Specifications

 

  • Up to 10 ft. Width x up to 39 ft. Length in sheets

  • Produced using both smooth (W) or deformed (D) wire

  • D2.1 to D24.0 (MD13.3 up to MD154.84)

  • Compared to rebar, engineered welded wire reinforcement reduces oversteeling

  • Bending of the sheets upon request

  • Yield strength of steel: deformed wire 485 MPa (70 ksi), smooth wire 450 MPa (65 ksi) and upon request up to 550 Mpa ( 80 ksi)

  • Products conform to ASTM A1064

Treillis-structural-produits.jpg
Bobines-produits.jpg
Fils-redresses-produits.jpg
Treillis-beton-produits-MD.jpg
Treillis-structural-produits.jpg
Treillis-de-mine-produits.jpg
Treillis-de-construction-produits.jpg
Tunnel-produits.jpg
Chaises-produits.jpg
bottom of page